Operators quote by the load, but a load is a box of a certain size that can only carry so much weight, so you need both numbers before you ask. Put in the length, width and depth of the heap, slab or hole, or a volume you already know, and choose what it is. The calculator gives the cubes as it lies, the larger loose volume once it is broken and shovelled, the weight in tonnes, and the bags, skips and tippers that takes. The rubble removal page covers the choices after that.
How the sums work
Length times width times depth gives the volume as it lies: in the wall, the slab or the ground. That volume times the material's density gives the tonnes, which do not change when it is broken. What changes is the space it takes. Broken concrete, brick and mixed rubble take about two thirds more room than they did whole; dug clay about 40% more; loam about a quarter more; sand and gravel about an eighth more.
The densities and swell factors come from engineering density tables, soil swell tables and road agency figures listed below. Garden refuse and junk are measured as loaded, so they do not swell.
What the three numbers tell you
- Volume as it lies: what you measured. Useful for the demolition or excavation quote, not for the truck.
- Loose volume: what the skip, bag or tipper must hold. Count loads from this one.
- Tonnes: what the vehicle must carry and what the weighbridge charges. Concrete and soil hit the weight limit before the box is full; garden refuse never does.
The bag, skip and tipper counts take whichever limit comes first. To compare every size side by side, use the skip size calculator.
Measuring without fooling yourself
- A heap is not a box. Measure the base and take about half the peak height as the depth, or the answer runs high.
- Slabs are thicker at the edges. Driveways and floors often have a thickened edge or a footing below; dig a test hole.
- Wet soil is heavier. After the Highveld summer storms or Cape winter rain, clay and sand weigh more than the tables say.
- Mixed loads vary. A heap with timber and ceiling boards in it is lighter than clean rubble but costs more to dispose of.
From the volume to a quote
Put the loose cubes, the material and a photo of the heap on the request below. Say whether it is clean rubble, soil or mixed, how far the truck can get to it, and whether you want loading included. An operator who knows the cubes and the material can quote a number of loads instead of guessing on the phone, and you can hold every quote to the same size. Ask each one what a load is in cubes and where it will be tipped. The building rubble page explains why clean loads cost less.
Sources
- Civil engineering reference, unit weights of construction materials: brick masonry 1,920 kg/m³; plain concrete 2,300 and reinforced 2,400 kg/m³; dry sand 1,540 to 1,600, wet sand 1,760 to 2,000; clay 1,440 dry to 1,760 damp; earth 1,410 to 1,840 dry and 1,600 to 2,000 moist
- Structural design site, unit weights to the European loading standard: to EN 1991-1-1: plain concrete 24.0 and reinforced 25.0 kN/m³; asphaltic concrete 24 to 25, hot rolled asphalt 23 kN/m³; dry sand 15 to 16 kN/m³; 37 mm screed 0.8 kN/m²
- Civil engineering site, density of construction materials: plain concrete 2,400 and reinforced 2,500 kg/m³; clay soil 1,900, sandy soil 1,800, gravel soil 2,000 kg/m³; cement mortar 2,080 kg/m³
- Engineering reference tables, soil and rock bulking factors: bulking: clay 20 to 40%, earth 20 to 30%, loam 15 to 25%, sand and gravel 20 to 30%, rock 40 to 80%; density at borrow: dry sand 1.60, dry gravel 1.80, clay 1.8 to 2.6, soil 1.2 to 1.6 t/m³
- Project engineering site, swell factors for soils: swell as a share of the volume in the ground: clay 40%, earth and loam 25%, sand 12%, gravel 12%, well blasted rock 65%
- Excavation calculator site, compiled swell and bulking factors: from road agency and textbook tables: concrete pavement 67%, brick pavement 67%, masonry rubble 67%, asphalt pavement 50%; clay 18 to 50%, sand 5 to 15%, gravel 5 to 33%, topsoil 25 to 56%
- United States environmental agency, volume to weight conversion factors (2016): mixed yard waste, uncompacted, 250 lb per cubic yard (about 0.15 t/m³); branches and stumps 127 lb; mixed household and commercial waste, uncompacted, 250 to 300 lb per cubic yard (0.15 to 0.18 t/m³)
Frequently asked questions
Why does my rubble take more space than the wall did?
How heavy is a cube of rubble?
Can I change the density if my soil is wet?
Who will quote once I know the volume?
More calculators and tools
- Skip size calculatorEvery bag, skip and truck for your load, by volume and by weight
- Demolition waste calculatorThe rubble a wall, a garage or a house leaves when it comes down
- Truck loads calculatorLoads, trips and hours to move a volume, by hand or with a TLB
- Removal cost calculatorBags, skips, a trailer and tippers priced for the same job
- Garden refuse calculatorBags, branches, palms and lawn cuttings in cubes and loads
- Landfill fee calculatorWhat tipping a load costs at the weighbridge, and the sums
